Modulation Schemes

Today vast amounts of information are communicated using radio communications systems. Both analogue radio communications systems, and digital or data radio communications links are used.
However one of the fundamental aspects of any radio communications transmission system is modulation, or the way in which the information is superimposed on the radio carrier.
In order that a steady radio signal or "radio carrier" can carry information it must be changed or modulated in one way so that the information can be conveyed from one place to another.
There are very many ways in which a radio carrier can be modulated to carry a signal, each having its own advantages and disadvantages. The choice of modulation have a great impact on the radio communications system. Some forms are better suited to one kind of traffic whereas other forms of modulation will be more applicable in other instances. Choosing the correct form of modulation is a key decision in any radio communications system design.

Basic types of modulation

There are three main ways in which a radio communications or RF signal can be modulated:
  • Amplitude modulation, AM:   As the name implies, this form of modulation involves modulating the amplitude or intensity of the signal.

    Amplitude modulation is a type of modulation where the RF waveform is modulated by a low frequency audio signal to provide the combined AM signal

    Amplitude modulation was the first form of modulation to be used to broadcast sound, and although other forms of modulation are being increasingly used, amplitude modulation is still in widespread use. Read more . . .
  • Frequency modulation, FM:   This form of modulation varies the frequency in line with the modulating signal.

    The concept of frequency modulation, is a type of modulation where the modulating signal varies the frequency of the carrier

    Frequency modulation has the advantage that, as amplitude variations do not carry any information on the signal, it can be limited within the receiver to remove signal strength variations and noise. As a result is form of modulation has been used for many applications including high quality analogue sound broadcasting.Read more . . .
  • Phase modulation, PM:   As the name indicates, phase modulation varies the phase of the carrier in line with the modulating signal.

    Phase modulation is a type of modulation where the instantaneous phase of the signal is varied from the steady state phase advancement in line with the modulation

    Phase modulation and frequency modulation have many similarities and are linked - one is the differential of the other. However phase modulation lends itself to data transmissions, and as a result its use has grown rapidly over recent years. Read more . . .
Each type of modulation has its own advantages and disadvantages, and accordingly they are all used in different radio communications applications.
In addition to the three main basic forms of modulation or modulation techniques, there are many variants of each type. Again these modulation techniques are used in a variety of applications, some for analogue applications, and others for digital applications.

Angle Modulation

Angle modulation is a name given to forms of modulation that are based on altering the angle or phase of a sinusoidal carrier. Using angle modulation there is no change inth e amplitude of the carrier.
The two forms of modulation that fall into the angle modulation category are frequency modulation and phase modulation.
Both types of angle modulation, namely frequency modulation and phase modulation are linked because frequency is the derivative of phase, i.e. frequency is the rate of change of phase.
Another way of looking at the link between the two types of modulation is that a frequency modulated signal can be generated by first integrating the modulating waveform and then using the result as the input to a phase modulator. Conversely, a phase modulated signal can be generated by first differentiating the modulating signal and then using the result as the input to a frequency modulator.

Signal bandwidth

One key element of any signal is the bandwidth it occupies. This is important because it defines the channel bandwidth required, and hence the number of channels that can be accommodated within a given segment of radio spectrum. With pressure on the radio spectrum increasing, the radio signal bandwidth is an important feature of any type of radio emission or transmission.
The bandwidth is governed by two major features:
  • The type of modulation   Some forms of modulation use their bandwidth more effectively than others. Accordingly where spectrum usage is of importance, this alone may dictate the choice of modulation.
  • The bandwidth of the modulating signal:   A law called Shannon's law determines the minimum bandwidth through which a signal can be transmitted. In general, the wider the bandwidth of the modulating signal, the wider the bandwidth required.

Modulating signal type

Apart from the form of modulation itself the type of signal being used to modulate the carrier also has a bearing on the signal. Analogue and data are two very different forms of modulating signal and need to be treated differently. While different formats of actual modulation may be used, the type of signal being applied via the modulator also have a bearing on the signal.
Signals for high quality stereo broadcasting will be treated differently to signals that provide digital telemetry for example. As a result, it is often important to know the signal type that needs to be carried by the RF carrier.
Modulation Schemes Modulation Schemes Reviewed by Suresh Bojja on 8/29/2015 01:14:00 AM Rating: 5
Theme images by sebastian-julian. Powered by Blogger.